Tension Wire and Ground Stakes

The shipping charge for Deer Fencing supplies on this page is $11.95 no matter how much you order (to 48 contiguous US states).

How to determine which Ground Stakes and Tension Wire you need for your deer Fence:

1. Choose Ground Stakes versus Ground Staples: The 12”-long Stakes are installed about 5’ apart – 14 per 100’ of Fencing. The 6”-long kinked Stakes are installed up to 3’ apart – 28 per 100’ of Fencing. Staples are 6” long and installed about 2.5’ apart – 42 per 100’. A deer browsing along the fence line can push her nose under the Fencing to eat more weeds and has been known to then slither right under! Being galvanized and kinked, the 12”-long Stakes are more secure for the long term but the shorter Staples and Stakes are often chosen by gardeners with rocky soil. Some gardeners have used large rocks or other materials they had on hand to secure their Fencing to the ground.
2. Choose your Tension Wire: The 11 gauge is a smaller diameter than the 8 gauge. The 11-gauge is suitable for the Professional and Extra-strength polypropylene grades.  The 8-gauge is suitable for all the polypropylene grades and the steel Estate Fencing.  Gravity and snow can contribute to a little sag in your Fencing between Posts. Tension Wire holds your fence up taut for a cleaner look and offers a little extra protection against falling branches.
3. Choose how you will install the Tension Wire to the top of the Fencing: Your installation will go faster when you use the D-rings attached with the 9/16 Pliers. However, if you are installing 165’ or less of Fencing, you can weave the Wire along the top of the Fencing and would not need any D-rings or Pliers.
4. Choose how to secure the Tension Wire to metal Corner and End Posts: (Just use fence nails or heavy-duty staples to attach it to wood Posts.) For smaller installations, use the inexpensive Cable Clamps which need only a common household tool like pliers or a nut driver to install. The Connection Sleeves are faster to install but require the Crimping Tool.

Nylon Wire 8-gauge 110' Spool of black, monofilament Tension Wire or top wire $19.95 Qty:	Cable Tie 8" 120-lb. 100-pack black nylon Heavy-duty. UV inhibitor. Attach Fencing to Angle Steel Posts. Save 15% on 3 or more. Options: Units Qty: 1-2 Units 3+ Units Qty: Price Each: $9.95 $8.45
Cable Tie 14" 120 lb. 100-pack Black nylon Heavy-duty. UV inhibitor. Attach Fencing to Deluxe, Corner and End Posts. Save 15% on 3 or more. Options: Units Qty: 1-2 Units 3+ Units Qty: Price Each: $14.05 $11.94	Ground Stakes 12" Kinked – Pkg. of 30 – Save 10% on two or more packages! 12″ long, 1/4″ thick galvanized and kinked Stakes. Use 14 per 100' of Fencing. Weight of 14 Stakes is 2 lb. 10 oz. ("Unit" in price table means one Package of 30.) Options: Units Qty: 1 Unit 2+ Units Qty: Price Each: $20.95 $18.85
Ground Stakes 12" Kinked – Box of 250 12″ long, 1/4″ thick galvanized and kinked stakes. Use 14 per 100' of Fencing. $163.00 Qty:	Ground Staples pkg. of 42 6″ long, double leg, 11-gauge steel pins. Use 42 per 100' of Fencing. $8.85 Qty:
Ground Staples pkg. of 200 6″ long, double leg, 11-gauge steel pins $40.35 Qty:	Nylon Wire 8-gauge 333' Spool of black, monofilament Tension Wire or top wire $49.00 Qty:
Nylon Wire 8-gauge 1000' Spool of black, monofilament Tension Wire $150.00 Qty:	9/16″ D-ring Fasteners Box of 2500, Galvanized Hog Rings to quickly attach Nylon Wire to your Deer Fencing. Mfg. #515DG50 fits GLFast GLF-9/16 and Stanley Ringer 9/16. $21.95 Qty:
Hog Ringer 9/16" D-ring Pliers Hand Pliers for 9/16 D-rings (Hog Rings) -- Quickly fasten the Guide Wire to your Fencing. $95.00 Qty:	Cable Clamp 1/8" 10-pack Secures Guide Wire on metal Posts at fence corners and ends with pliers or nut driver. Fits both 8- and 11-gauge Guide Wire. $5.95 Qty:
Connection Sleeves for 8 ga. Wire -- Pack of 25 Secures Guide Wire on metal Posts at fence corners and ends. Requires Sleeve Crimping Tool (sold separately). $6.95 Qty:	Connection Sleeves for 11 ga. Wire – Pack of 25 Secures Guide Wire on metal Posts at fence corners and ends. Requires Sleeve Crimping Tool (sold separately). $6.65 Qty:
Sleeve Crimping Tool Squeezes the Guide Wire Connection Sleeves to hold the Guide Wire in place at corner and end Posts. $89.00 Qty: